# The maximum bending moment under a particular point load among a train of point loads crossing a simply supported girder occurs when that load is:

1.  At mid-spam

2.  At one-third span

3.  At one-quarter span

4.  So placed that the load point and the point of CG of the train of loads are equidistant from the mid-span.

4

So placed that the load point and the point of CG of the train of loads are equidistant from the mid-span.

Explanation :
No Explanation available for this question

# If a cantilever beam of span L and flexural rigidity EI carries a moment M at the free end, the deflection at that end is:

1.  ML/24EI

2.  ML2/12EI

3.  ML/6EI

4.  ML2/2EI

4

ML2/2EI

Explanation :
No Explanation available for this question

# The maximum number of unknown forces that can be determined in a concurrent coplanar force system under equilibrium is:

1.  2

2.  3

3.  6

4.  1

4

2

Explanation :
No Explanation available for this question

# The process of diffusion of one liquid into the other through a semi-permeable membrane is called:

1.  Viscosity

2.  Osmosis

3.  Surface tension

4.  Cohesion

4

Osmosis

Explanation :
No Explanation available for this question

# The units of dynamic or absolute viscosity are:

1.  Metres2 per sec

2.  Kg sec/meter

3.  Newton-sec per meter

4.  Newton-sec2 per meter

4

Newton-sec per meter

Explanation :
No Explanation available for this question

# The continuity equation is connected with:

1.  Viscous/ unviscous fluids

2.  Compressibility of fluids

3.  Conservation of mass

4

Conservation of mass

Explanation :
No Explanation available for this question

# The rise or depression of liquid in a tube due to surface tension wim increase in size of tube will:

1.  Increase

2.  Remain unaffected

3.  May increase or decrease depending on the characteristics of liquid

4.  Decrease

4

Decrease

Explanation :
No Explanation available for this question

# Liquids transmit pressure equally in all the directions. This is according to:

1.  Boyle's law

2.  Archimedes principle

3.  Pascal's law

4.   Newton's formula

4

Pascal's law

Explanation :
No Explanation available for this question

# The most suitable type of equipment for compaction of cohesive soils is:-

1.  Smooth-wheeled roller

2.  Vibratory roller

3.  Sheep’s foot roller

4.  Tamper

4

Sheep’s foot roller

Explanation :
No Explanation available for this question

1.  Dragline

2.  Power shovel

3.  Clamshell

4.  Hoe

4