Eamcet - Physics - Properties Of Bulk Matter Test

Test Instructions :

1. The Test is 1hr duration.
2. The Test Paper consists of 30 questions. The maximum marks are 30.
3. All the questions are multiple choice question type with three options for each question.
4. Out of the three options given for each question, only one option is the correct answer.
5. Each question is allotted 1 mark for each correct response.
6. 0.25 will be deducted for incorrect response of each question.
Start Test

   Time Left : 00 : 30    : 00

A beam of charged particles of charge 'q' and mass m are accelerated from rest through a potential difference of 100 volts. They pass through crossed electric and magnetic fields which together produce null deflection. If these electronic and magnetic fields are respectively 15xl03 volts/m and 5weber/m2, then 'q/m' has a value, in coulomb/kg, equal to :

  

  

  

  

When a uniform wire of radius r, is stretched by a 2 kg weight the increase in its length is 2.00 mm. If the radius of the wire is r/2 and other conditions remaining the same, the increase in its length is

  

  

  

  

A wire stretches by 0.01 m when it is stretched by a certain force.Another wire of the same material but double the length and double the diameter is stretched by the same force.The elongation is

  

  

  

  

A tension of 22 N is applied to a copper wire of cross-sectional area 0.02 cm2 Young’s modulus of copper is 1.1x1011 N/m2and Poisson’s ratio 0.32. The decrease in cross sectional area will be

  

  

  

  

Which of the following is more effective in inducing nuclear fission ?

  

  

  

  

The length of an elastic string is 'a' metres when the longitudinal tension is 4 N and 'b' meters when the longitudinal tension is 5 N. The length of the string in metres when the longitudinal tension is 9 N is:

  

  

  

  

A steel wire can withstand a load up to 2940 N, A load of 150 kg, is suspended from a rigid support. The maximum angle through which the wire can be displaced from the mean position, so that the wire does not break when the load passes through the position of equilibrium, is

  

  

  

  

When a wire of length 10 m is subjected to a force of 100 N along its length, the lateral strain produced is 0.01 x 10-3 m. The Poisson's ratio was found to be 0.4. if the area of cross-section of wire is 0.025 m2, its Young's modulus is

  

  

  

  

A light of length 75 cm is suspended from the ceiling horizontally by means of two vertical wires of equal length tied to its ends. One of the wires is made of steel of cross section 0.2 sq cm.The Position along the rod at which a weight may be hung to produce equal stresses.ysteel=20x1010 N/m2,Ybrass=10x1010N/m2

  

  

  

  

The Poisson's ratio of a material is 0.4. If a force is applied to a wire of this material, there is a decrease of cross-sectional area by 2%. The percentage increase in its length is:

  

  

  

  

Note:
  • Click the 'Submit Test' button given in the bottom of this page to Submit your answers.
  • Test will be submitted automatically if the time expired.
  • Don't refresh the page.