1. Work
2. Tool
3. Chip
4. Equality by all of these
Chip
1. By which the face of the tool is inclined sideways
2. By which the face of the tool is inclined towards back
3. Between the surface of the flank immediately below the point and a line drawn from the point perpendicular to the base
4. Between the surface of the flank immediately below the point and a plane at right angles to the centre line of the point of the tool
By which the face of the tool is inclined sideways
1. Direction of tool travel
2. Shear plane
3. Direction of depth of cut
4. None of these
Shear plane
1. Ceramics
2. Ferrous cast alloys
3. Cemented carbide
4. Non-ferrous cast alloy
Non-ferrous cast alloy
1. Available in the form of tips
2. Made by cold pressing techniques
3. Can’t be reground
4. All of these
All of these
1. Initial cost is low
2. Tool changing is easier
3. Regrinding is not required
4. None of these
Initial cost is low
1. Nickel
2. Cobalt
3. Aluminium
4. Chromium
Cobalt
1. Compression
2. Tension
3. Shear
4. Compression & tension
Shear
1. By which the face of the tool is inclined sideways
2. By which face of the tool is inclined towards back
3. Between the surface of the flank immediately below the point and a line drawn from the point perpendicular to the base
4. Between the surface of the flank immediately below the point and a plane at right angles to the centre line of the point of the tool
By which face of the tool is inclined towards back
1. Magnesium alloys, grey cast iron, low carbon steel, Monel metal
2. Grey cast iron, low carbon steel, magnesium alloys, Monel metal
3. Magnesium alloys, low carbon steel, grey cast iron, Monel metal
4. Magnesium alloys, grey cast iron, Monel metal, low carbon steel
Magnesium alloys, grey cast iron, low carbon steel, Monel metal