Choose the most appropriate word from the options given below to complete the following sentence.  If  you  are  trying  to make  a  strong  impression  on  your  audience,  you cannot do so by being understated, tentative or_____________

1.  Hyperbolic

2.  Restrained

3.  Argumentative

4.  Indifferen

View Answer  
4
Correct Answer :

Restrained


Explanation :
No Explanation available for this question

A container originally contains 10  litres of pure spirit. From  this container 1 litre of spirit  is  replaced with 1  litre of water. Subsequently, 1  litre of  the mixture  is again replaced with 1 litre of water and this process  is repeated one more time. How much spirit is now left in the container

1.  7.58 litres

2.  7.84 litres

3.  7 litre

4.  7.29 litres

View Answer  
4
Correct Answer :

7.29 litres


Explanation :
No Explanation available for this question

Few school curricula include a unit on how to deal with bereavemen grief, and yet all students at some point  in their lives suffer from  l through death and parting. Based  on  the  above  passage  which  topic  would  not  be  included  in  a  u bereavement

1.  how to write a letter of condolence

2.  what emotional stages are passed through in the healing process

3.  what the leading causes of death are

4.  how to give support to a grieving friend

View Answer  
4
Correct Answer :

what the leading causes of death are


Explanation :
No Explanation available for this question

P, Q, R and S are  four  types of dangerous microbes  recently  found  in a human habitat. The area of each  circle with  its diameter printed  in brackets  represents  the growth of a single microbe surviving human immunity system within 24 hours  of entering the body. The danger to human beings varies proportionately with the toxicity,  potency  and  growth  attributed  to  a  microbe  shown  in  the  figure below A  pharmaceutical  company  is  contemplating  the  development  of  a  vaccine against  the most dangerous microbe. Which microbe should  the company  target  in its first attempt

1.  p

2.  Q

3.  R

4.  S

View Answer  
4
Correct Answer :

S


Explanation :
No Explanation available for this question

The variable cost (V) of manufacturing a product varies according to the equation  V= 4q, where q is the quantity produced. The fixed cost (F) of production of same product  reduces  with  q  according  to  the  equation  F =  100/q.  How many  units should be produced to minimize the total cost (V+F)

1.  5

2.  4

3.  7

4.  6

View Answer  
4
Correct Answer :

5


Explanation :
No Explanation available for this question

A  transporter  receives  the  same number of orders each day. Currently, he has some pending orders  (backlog)  to be shipped.  If he uses 7  trucks,  then at  the end  of  the 4th  day  he  can  clear  all  the  orders.  Alternatively,  if he uses  only 3 trucks,  then all  the orders are cleared at  the end of  the 10th day. What  is  the minimum number of trucks required so that there will be no pending order at the end of the 5th day

1.  4

2.  5

3.  6

4.  7

View Answer  
4
Correct Answer :

6


Explanation :
No Explanation available for this question

Which of the following is not a decision taken during the aggregate production planning stage

1.  Scheduling of machines

2.  Amount of labour to be committed

3.  Rate at which production should happen

4.  Inventory to be carried forward

View Answer  
4
Correct Answer :

Amount of labour to be committed


Explanation :
No Explanation available for this question

A CNC  vertical milling machine has to cut a straight slot of 10 mm width and 2mm depth by a cutter of 10mm diameter between points (0,0) and (100,100) o the xy plane (dimensions in mm). The feed rate used for milling is 50 mm/min, milling time for the slot (in seconds ) is

1.  120

2.  170

3.  180

4.  240

View Answer  
4
Correct Answer :

120


Explanation :
No Explanation available for this question

A solid cylinder of diameter 100mm and height 50mm is forged between two frictionless flat dies to a height of 25mm. the percentage change in diameter is

1.  0

2.  2.07

3.  20.7

4.  41.4

View Answer  
4
Correct Answer :

41.4


Explanation :
No Explanation available for this question

The velocity triangles at the inlet and exit of the rotor of a turbo machine are shown. V denotes the absolute velocity of the fluid, and U denotes the blade velocity . subscripts 1 and 2 refer to inlet and outlet respectively. If V2=W1 and V1=W2, then the degree of reaction is:

1.  0

2.  1

3.  0.5

4.  0.25

View Answer  
4
Correct Answer :

0.5


Explanation :
No Explanation available for this question
Previous Next

Interview Questions

MongoDB
Java Script
Node JS
PHP
JQuery
Python