1. amplifiers
2. actuators
3. sensors
4. all of these
all of these
1. a function of the transient response
2. zero for all inputs to type 1 system
3. decreased by increasing gain
4. independent of the type of input
decreased by increasing gain
1. A manipulated variable
2. A controlled variable
3. A process parameter that changes value
4. All these
All these
1. Derivative control does not eliminate offset error
2. Internal control has slower response to an error signal
3. Derivative control responds to a change in the rate of change in the error signal
4. All of these
All of these
1. Analog and digital
2. Analog and mechanical
3. Pneumatic and analog
4. None of these
Analog and digital
1. applies only to milling machines
2. is a method for producing exact number of parts per hour
3. is a method for controlling by means of a set of instructions
4. all of these
is a method for controlling by means of a set of instructions
1. Tape input
2. Machine tool
3. Controller
4. All of these
All of these
1. factory management
2. automated design
3. tool design
4. quick and in expensive product change
quick and in expensive product change
1. allows faster machine checkout
2. is easier to repair than standard relay logic
3. has all the logic status maintained in memory
4. all of these
all of these
1. are programmed using relay ladder logic and are widely used in many different machines
2. are poor industrial controller with limited use
3. can not perform functions other than relay logic
4. all of these
are programmed using relay ladder logic and are widely used in many different machines