1. 1, 2 and 3 only
2. 1, 3 and 4 only
3. 2, 3 and 4 only
4. 1, 2, 3 and 4
1, 2, 3 and 4
1. 12.5 N/mm2
2. 7.5 N/mm2
3. 5.0 N/mm2
4. 2.5 N/mm2
12.5 N/mm2
1. At the lower rate than the consumption
2. At a higher rate than the consumption
3. At an equal rate of the consumption
4. Depends on other considerations
At a higher rate than the consumption
1. Almost same
2. Slightly more
3. Slightly less
4. Much less
Much less
1. Distributes bending moment uniformly
2. Prevents corners from lifting
3. Controls cracking at corners
4. Does not allow any twist at corners.
Controls cracking at corners
1. M 15
2. M 20
3. M 30
4. M 40
M 40
1. 1
2. 2
3. 3
4. 4
2
1. 26
2. 20
3. 12.5
4. 7
12.5
1. 25 mm
2. 30 mm
3. 35 mm
4. 40 mm
25 mm
1. At the center of the column
2. At the face of the column
3. At a distance d/2 away from the face of the column
4. At a distance d/2 away from the center of the column
At a distance d/2 away from the face of the column