1. Number of instructions in the current program that have already been executed
2. Total number of instructions in the program being executed
3. Memory address of the instruction that is being currently executed
4. Memory address of the instruction that is to be executed next
Memory address of the instruction that is to be executed next
No Explanation available for this question
1. 2n
2. 22n
3. 2n-1
4. 2n
22n
No Explanation available for this question
1. Is disconnected from the system bus till the reset is pressed
2. Halts execution of the program and returns to monitor
3. Enters into a halt state and the buses are tri-stated
4. Reloads the program from the locations 0024 and 0025 H.
Enters into a halt state and the buses are tri-stated
No Explanation available for this question
1. Counter 0 to mode 0
2. Counter 1 to mode 0
3. Counter 2 to mode 0
4. Counter 0 to mode 0
Counter 1 to mode 0
No Explanation available for this question
1. Set, reset
2. Reset, set
3. Reset, reset
4. Set, set
Set, reset
No Explanation available for this question
1.
2.
3.
4.
No Explanation available for this question
1. A B C D 1 2 3 4
2. A B C D 4 2 3 1
3. A B C D 3 2 1 4
4. A B C D 2 3 4 1
|
A |
B |
C |
D |
|
4 |
2 |
3 |
1 |
No Explanation available for this question
1. 4 ms
2. 0.4 ms
3. 10 ms
4. 25 ms
0.4 ms
No Explanation available for this question
1. 10MHZ
2. 100MHZ
3. 1GHZ
4. 2GHZ
1GHZ
No Explanation available for this question
1. Executing a RIM instruction
2. Execution RST 1
3. Using TRAP
4. None of these
Executing a RIM instruction
No Explanation available for this question