1. the amount of input required to produce unit pen deflection
2. the smallest signal required to produce detectable output
3. the maximum error in sensitivity displayed by a pen
4. degree to which instrument in not sensitive enough to repeat readings
the maximum error in sensitivity displayed by a pen
1. provide half wave rectification
2. make the recitifier D2 perform: full-wave rectification
3. by-pass revers leakage current of D, in the negative cycle of the input
4. short circuit-over range voltages
by-pass revers leakage current of D, in the negative cycle of the input
1. higher Value of CMIZR
2. lower noise figure
3. elimination of the need for accurate matching of resistors
4. simplicity of gain adjustment
elimination of the need for accurate matching of resistors
1. frequency measurement mode only
2. period Measurement mode only
3. frequency and-period measurement modes respectively
4. period and frequency measurement modes respectively
period and frequency measurement modes respectively
1. 1000 / πHz
2. 500 Hz
3. 1000 HZ
4. 1000 πHZ
1000 / πHz
1. 500
2. 750
3. 1000
4. 1500
1000
1. 4
2. 8
3. 10
4. 14
8
1. Conversion time
2. Acquisition time
3. Aperture time
4. Sample mode
Conversion time
1. 2 and 3 are correct
2. 1 and 4 are correct
3. 2 and 4 are correct
4. 3 and 4 are correct
2 and 3 are correct
1. 7.1 V
2. 10.0 V
3. 11.1.V
4. 22.2 V
11.1.V