1. Reduce the line loading
2. Improve the stability of the system
3. Reduce the voltage profile
4. Improve the protection of the line
Improve the stability of the system
1. Thermal limit
2. Voltage drop
3. Stability limit
4. Corona loss
Stability limit
1. Conductors size is reduced
2. Smooth conductor is reduced
3. Sharp points are provided in the line hardware
4. Current density in conductors is reduced
Smooth conductor is reduced
1. Prevent earth fault
2. Provide a safety measure for any high flying object
3. Provide a shield to the phase conductors from direct lighting stroke
4. Provide mechanical strength to the towers
Provide a shield to the phase conductors from direct lighting stroke
1. Determinant is unity
2. Determinant is zero
3. Determinant is infinity
4. Rank is unity
Determinant is zero
1. Time taken to perform one iteration in the NR method is less when compared to the time taken in the GS method
2. Number of iterations required in the NR method is more when compared to that in the GS method
3. Number of iterations required is not independent of the size of the system in the NR method
4. Convergence characteristics of the NR method are not affected by the selection of slack bus
Convergence characteristics of the NR method are not affected by the selection of slack bus
1. program is stored in memory and data is stored in registers
2. program is stored in registers and data is stored in memory
3. both program and data are stored in memory
4. both program and data are stored in registers
program is stored in memory and data is stored in registers
1. Most of the control and arithmetic logic functions of a computer
2. Most of the RAM
3. Most of the ROM
4. Peripheral drivers
Most of the control and arithmetic logic functions of a computer
1. 5
2. 8
3. 11
4. 13
13
1. 1
2. 2
3. 3
4. 5
3